(11 ratings)
Walls, floors, stair-steps and so on... they all are modelled from primitives or extruded splines. Mapping was also quite simple: all elements were mapped by a simple UVW Box. As I eventually attached all the steps into one single mesh, I had to boolean them with some cylinders in order to get the proper holes where I could introduce the actual stepping spotlights.
All of the seats come from one original model with randomized elements. Both the back and the seat itself were box modelled with an applied turbosmooth modifier while the rest of the seat elements are simple modified primitives. Once the seat was done, each group of mobile elements were attached into one and transformed into Vray proxies.
Then, I placed their own pivot point in it's logical place and grouped the seat afterwards.
Why proxies? --------> The seat itself has a lot of polys because of the seams and I had to replicate it 510 times! So the VrayProxy was the best solution...
And why did I place the pivot in the mobile axis parts? ---------> Cause we want to randomize them!
After duplicating them all by arc splines and the wonderful spacingtool, I had to add a bit of chaos using some wonderful scripts from Blur Studio. Making several random selection sets with "randomselect" script, I could do some rotation variations via the "randomtransform" script (Blur Studio too)...
Materials:
The scene does not have many different materials. We have basically some timber in contrast with the white fabric seats and ceiling concrete. The original idea was to get three primary colour spread over the big surfaces.
Here are some of the materials and textures used:
Lighting:
This chamber auditorium has no natural light openings so the place had to be lit in a completely artificial way. I chose to ignore the typical stage spotlights since I was more interested in dividing spaces by the light areas: Upper cold fluorescent light against the warmer steps with small leading lights.
Each step spotlight has a vraylight in front of it and is invisible (affecting only in diffuse and specular terms). They're all instanced so as to allow for more easier and global control.
For the upper light panels, I also cloned an instanced planar vraylight using the spacingtool. The lights are looking down and placed inside the upper hollow pits and they have one-sided sss-plastic single face in front of them which doesn't cast shadows. The no-casting shadow point is to allow the lights to "freely" affect both diffuse and specular surfaces, but avoid the enclosure panels' direct shadow while still being back-lit to show a translucent effect.
Rendering:
It is important to care about balance in every composition. After deciding what was going to appear in the comp, I chose to set the shot image aspect. Afterwards, it was time to find the right balance between volumes by changing camera position, focal length, etc... All shots here are made by physical cameras because of the need of real exposure, vertical correction, etc...
Here are two good architectural photograph references. Of course all the advice won't fix things in CG, but I think it is quite good to know it anyway in general terms:
>> Interior Photography Tips and Tricks
>> Architectural Photography: Examples and Tips
All images were rendered in3d MAX and ChaosGroup Vray in a LinearWorkFlow colorspace :
>> Linear workflow 'reloaded'
Render parameters are quite standard:
Postproduction:
Obviously all process steps are highly important in order to get a desired CG picture. However, I feel IMHO that postproduction work is the most personal step. In this example, I decided to go for an old-analog Lomo's Holga and Polaroid film look. All post work was done in AfterEffects.
Here are the postprocessing steps:
That's all folks! Hope this has been helpful.
20 Random Tutorials from the same category :
Exterior Scenes Part 1 - Composition & Cameras
Making of "Time is Running"
Street Cop Workflow
Illumination Tutorial (3dsmax MentalRay)
Special Exterior Mapping Problems
Material Tutorial: Glowing Material with Mental Ray
Making of the Auditorium with 3dsmax
Exterior Scene Part 3 Lighting
Making of The Phoenix Building - 3dsmax
Exterior Scenes Part 2 - Modeling (ACAD/Revit/SketchUp Into Max)